姓名:魏毅
职称:特聘教授、博士生导师 办公电话:021-67874276 通讯地址:复材创新中心大楼A322室 电子邮箱:weiy@dhu.edu.cn
1、主要经历2014-现在东华大学,民用航空复合材料协同创新中心,特聘教授 2005-2014美国Cytec公司,高级研究员,高工 2002-2005美国Avery Dennison公司聚合物部,高级研究员 2001-2002美国Park航太公司研究部,高级研究员 1995-2001美国HB Fuller公司高分子研发部,高级化学师 1993-1995美国里海大学(Lehigh University),表面化学研究所,博士后研究员 1990-1993加拿大滑铁卢大学(University of Waterloo),化学工程,博士 1987-1990四川大学,高分子材料科学与工程系,讲师 1984-1987四川大学,高分子材料科学与工程,硕士 1980-1984四川大学,高分子材料科学与工程,学士
2、教学内容 3、研究方向先进复合材料基体树脂体系及其功能性优化 热固性树脂增韧及增韧机理 环氧树脂阻燃及固化反应 先进复合材料界面及界面域 先进复合材料树脂及预浸料制造工程
4、研究成果[1]Qidi Zhu, Yi Wei, Qiuran Jiang, Yiping Qiu, Wanshuang Liu, Recycle carbon fiber reinforced polyimine resin composites, Sampe Journal, 2019, 55, 20-28. [2]Bo Yang, Yanyun Mao, Yihui Zhang, Liying Zhang, Yi Wei, Yiping Qiu, Wanshuang Liu, A novel liquid imidazole-copper (II) complex as a thermal latent curing agent for epoxy resins, Polymer, 2019, 178, 121586. [3]Qiaole Hu, Hafeezullah Memon, Yiping Qiu* and Yi Wei*, The Failure Mechanism of Composite Stiffener Components Reinforced with 3D Woven Fabrics, Materials 2019, 12, 2221. [4]Qiaole Hu, Yihui Zhang, Yanyun Mao, Hafeezullah Memon, Yiping Qiu, Yi Wei, Wanshuang Liu, A comparative study on interlaminar properties of L-shaped two-dimensional (2D) and three-dimensional (3D) woven composites, Applied Composite Materials, 2019, DOI: 10.1007/s10443-018-9745-6. [5]Min Guo, Panpan Liu, Bingxue Huang, Yiping Qiu, Yi Wei, Ying Ma*, Hierarchical assembly of silver and gold nanoparticles in two-dimension: Toward fluorescence enhanced detection platforms, Applied Surface Science, Volume 476, 2019, 1072-1078. [6]Bo Yang, Yanyun Mao, Yihui Zhang, Yi Wei, Wanshuang Liu, Yiping Qiu, Fast-Curing Halogen-Free Flame-Retardant Epoxy Resins and Their Application in Glass Fiber Reinforced Composites, Textile Research Journal, 2018, doi: org/10.1177/ 0040517518819845 [7]Yi Wei, Xiaoyu Hu, Qiuran Jiang, Zeyu Sun, Pengfei Wang, Yiping Qiu, Wanshuang Liu*, Influence of graphene oxide with different oxidation levels on the properties of epoxy composites, Composites Science and Technology, 2018, 161: 74-84. [8]Sean Bowman, Qiuran Jiang, Hafeezullah Memon, Yiping Qiu, Wanshuang Liu, Yi Wei, Effects of styrene-acrylic sizing on the mechanical properties of carbon fiber thermoplastic towpregs and their composites., Molecules, 2018, 23: 547. [9]Wang Yiru, Wanshuang Liu,Yiping Qiu, Yi Wei, A one-component, fast-cure and economical epoxy resin system suitable for liquid molding of automotive composite parts, Materials, 2018, 11: 685. [10]Sean Bowman, Xiaoyu Hu, Qiuran Jiang, Yiping Qiu, Wanshuang Liu, Yi Wei, Effects of graphene-oxide-modified coating on the properties of carbon fiber reinforced polypropylene composites, Coating, 2018, 8: 149. [11]胡小雨,蒋秋冉,魏毅,刘万双*,碳纤维-氧化石墨烯改性环氧树脂复合材料,复合材料学报, 2018, 35: 1691-1699. [12]Wanshuang Liu, Yiru Wang, Pengfei Wang, Yan Li, Qiuran Jiang, Xiaoyu Hu, Yi Wei, Yiping Qiu, Seyed Ismail Seyed Shahabadi, Xuehong Lu*, A biomimetic approach to improve the dispersibility, interfacial interactions and toughening effects of carbon nanofibers in epoxy composites, Composites Part B-Engineering, 2017, 113: 197-205. [13]Wanshuang Liu, Yimin Yao, Ouli Fu, Sihan Jiang, Yucheng Fang, Yi Wei, Xuehong Lu, Lignin-derived carbon nanosheets for high-capacitance supercapacitors RSC Advances, 2017, 77, 48537-48543. [14]高雄,胡侨乐,马颜雪,张琦,魏毅,邱夷平,不同结构厚截面三维机织碳纤维复合材料的弯曲性能对比,纺织学报, 2017, 38(9):66-71. [15]刘万双,魏毅,余木火,汽车轻量化用碳纤维复合材料国内外应用现状,纺织导报, 2016, 5, 4-52. [16]Yi Wei and R.Y.M. Huang, Pervaporation with latex membranes: A study of membrane and pervaporation effects, Separation Sci. and Tech., 1995, 30(5) 697-717. [17]Yi Wei and R.Y.M. Huang, Effect of film aging on the pervaporation properties of latex membranes, Separation Sci. and Tech., 1995, 30(6), 981-992. [18]R.Y.M. Huang and Yi Wei, Pervaporation with latex membranes. II. Pervaporation properties and aging effect, J. Membrane Sci., 1994, 87, 257. [19]R.Y.M. Huang and Yi Wei, Pervaporation properties of ionically crosslinked latex membranes, J. of Appl. Polym. Sci., 1994, 53, 179. [20]R.Y.M. Huang and Yi Wei, Pervaporation with latex membranes. III. Sorption and Pervaporation properties: a comparison between latex and solvent cast membranes, J. Membrane Sci., 1994, 89, 9. [21]Yi Wei and R.Y.M. Huang, Selective sorption of latex membranes, Separation Sci. and Tech., 1994, 29(3), 301. [22]R.Y.M. Huang and Yi Wei, Modelling of pervaporation with latex membranes, Separation Sci. and Tech., 1994, 29(9), 1193. [23]Yi Wei and R.Y.M. Huang, Pervaporation with latex membranes. I. Latex membrane preparation and characterization, J. Membrane Sci., 1993, 82, 27.
5、科研项目高性能阻燃材料用于复合材料功能性评价 复合材料树脂及预浸料系列的开发 轨道交通车辆内饰三明治结构评价 生物基可回收型环氧树脂的制备及性能 HSF碳纤维及复合材料应用评价及开发 废旧聚苯硫醚过滤材料增强复合材料的开发 生物基可回收型环氧树脂的结构设计及性能 船舶复合材料用无卤阻燃型环氧树脂基体开发 通用飞机筒形复合材料夹层结构机身设计技术研究 “复兴号”高铁复材塞拉门设计及制造工艺技术开发 高温超导磁悬浮列车复合材料车身设计及制造
6、获奖荣誉上海产学合作教育成果二等奖 中国纺织工业联合会教学成果一等奖 国家科技进步三等奖
|
|